UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio and TV Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Other Discussions > Forum Announcements and Comments

Notices

Forum Announcements and Comments Announcements about forum changes will be made in this section. All new threads here now require moderator approval.

Closed Thread
 
Thread Tools
Old 28th Sep 2021, 10:26 am   #1
John10b
Nonode
 
Join Date: Nov 2016
Location: Aberaeron, Ceredigion, Wales, UK.
Posts: 2,869
Default Receiving posts late.

Not sure if this is correct place to ask this question, so mods move as necessary, thank you.
Why do I seem to get some posts/ replies late? I closed a post and then noticed someone had replied to it after I told mods to close? Thanks
John
John10b is offline  
Old 28th Sep 2021, 11:15 am   #2
Station X
Moderator
 
Station X's Avatar
 
Join Date: Jan 2003
Location: Ipswich, Suffolk, IP4, UK.
Posts: 21,192
Default Re: Receiving posts late.

When you ask for a thread, not post, to be closed it may not happen instantly. During the delay to closure the thread is open to further posts.

In some cases the moderators may decide not to close the thread, if for example they think it has not reached a conclusion.
__________________
Graham. Forum Moderator

Reach for your meter before you reach for your soldering iron.
Station X is online now  
Old 28th Sep 2021, 6:27 pm   #3
John10b
Nonode
 
Join Date: Nov 2016
Location: Aberaeron, Ceredigion, Wales, UK.
Posts: 2,869
Default Re: Receiving posts late.

Thank you, due to my mistake I posted this twice, perhaps you could merge the two.
John
John10b is offline  
Closed Thread

Thread Tools



All times are GMT +1. The time now is 11:49 am.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.