|
Vintage Test Gear and Workshop Equipment For discussions about vintage test gear and workshop equipment such as coil winders. |
|
Thread Tools |
13th Dec 2018, 11:16 pm | #1 |
Retired Dormant Member
Join Date: Jan 2011
Location: West Sussex, UK.
Posts: 1
|
AVO Multiminor MK5 photos required of RV1 connections.
Hello
I have recently come across a partially refurbished Multiminor Mk5, with some resistors having been replaced and the chap seems to have made a very nice job of it. Unfortunately the refurbishment wasn't quite finished and the leads to the potentiometer RV1 left disconnected. Could any of you good people post a photo of two of the three leads from RV1 and to where they are attached. Many Thanks /Mike |
14th Dec 2018, 1:21 am | #2 |
Dekatron
Join Date: Apr 2012
Location: Worksop, Nottinghamshire, UK.
Posts: 5,554
|
Re: AVO Multiminor MK5 photos required of RV1 connections.
Welcome to the forum.
It is not clear to me what part of the RV1 wiring you would like to see. I have got one with a movement strip down needed. An internal photo of the movement would be useful while yours is stripped down if you are that far in. |
14th Dec 2018, 1:51 pm | #3 |
Nonode
Join Date: May 2004
Location: Halifax, West Yorkshire, UK.
Posts: 2,587
|
Re: AVO Multiminor MK5 photos required of RV1 connections.
A copy of the manual including the schematic can be found by clicking on this link:
http://www.richardsradios.co.uk/AVO/...inor%20Mk5.pdf This should help in making sure that RV1 is connected correctly. Alan |