UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Offered and Wanted Messages > Sets, Parts and Service Information Wanted (private buyers only, no swaps)

Notices

Sets, Parts and Service Information Wanted (private buyers only, no swaps) If you need help obtaining components, sets or equipment, post a message here. Private buyers only - no traders. No swaps.

Closed Thread
 
Thread Tools
Old 16th Jan 2019, 2:08 pm   #21
Station X
Moderator
 
Station X's Avatar
 
Join Date: Jan 2003
Location: Ipswich, Suffolk, IP4, UK.
Posts: 14,539
Default Re: Anyone able to accurately machine a very small metal part for me?

Quote:
Originally Posted by Ti Pwun View Post
What file format do you need?
A simple dimensioned sketch would suffice, but if you want to CAD it I can open .dxf and .dwg files.

I see you're going with John's offer though.
__________________
Graham. Forum Moderator

Keep the soldering iron hot.
Station X is online now  
Old 16th Jan 2019, 2:17 pm   #22
John M0GLN
Heptode
 
John M0GLN's Avatar
 
Join Date: Jan 2004
Location: Southport, Lancashire, UK.
Posts: 842
Default Re: Anyone able to accurately machine a very small metal part for me?

OK i'll finish it off, you said the length could be longer, what do you want? Up to 60mm it can be, let me know and PM me your address, there's no charge for it, unless of course it makes you another Bill Gates and then you could perhaps find the odd million to pass on, LOL.

John
John M0GLN is offline  
Old 16th Jan 2019, 2:26 pm   #23
Ti Pwun
Heptode
 
Ti Pwun's Avatar
 
Join Date: Aug 2013
Location: Bradford, West Yorkshire, UK.
Posts: 873
Default Re: Anyone able to accurately machine a very small metal part for me?

50mm would be perfect, thanks. PM on its way.

Thanks John.
__________________
Jon
http://jonsprintshop.com
Ti Pwun is offline  
Old 16th Jan 2019, 2:30 pm   #24
Ti Pwun
Heptode
 
Ti Pwun's Avatar
 
Join Date: Aug 2013
Location: Bradford, West Yorkshire, UK.
Posts: 873
Default Re: Anyone able to accurately machine a very small metal part for me?

Seemed like John had everything to do the job so I went with that, but thanks for the offer.

Quote:
Originally Posted by Station X View Post
Quote:
Originally Posted by Ti Pwun View Post
What file format do you need?
A simple dimensioned sketch would suffice, but if you want to CAD it I can open .dxf and .dwg files.

I see you're going with John's offer though.
__________________
Jon
http://jonsprintshop.com
Ti Pwun is offline  
Old 16th Jan 2019, 4:05 pm   #25
John M0GLN
Heptode
 
John M0GLN's Avatar
 
Join Date: Jan 2004
Location: Southport, Lancashire, UK.
Posts: 842
Default Re: Anyone able to accurately machine a very small metal part for me?

Quote:
Originally Posted by Ti Pwun View Post
Seemed like John had everything to do the job so I went with that, but thanks for the offer.

Quote:
Originally Posted by Station X View Post
Quote:
Originally Posted by Ti Pwun View Post
What file format do you need?
A simple dimensioned sketch would suffice, but if you want to CAD it I can open .dxf and .dwg files.

I see you're going with John's offer though.
Yes but you haven't seen it yet, it may not be exactly to the standard that you are expecting and Graham does have a far more accurate milling machine than I do and probably far more experience in using one, as I said before if it's not suitable for any reason don't worry about throwing it in the bin and seeking another source.

John
John M0GLN is offline  
Old 16th Jan 2019, 4:28 pm   #26
Ti Pwun
Heptode
 
Ti Pwun's Avatar
 
Join Date: Aug 2013
Location: Bradford, West Yorkshire, UK.
Posts: 873
Default Re: Anyone able to accurately machine a very small metal part for me?

Yes, I will get in touch with Graham if it isn't suitable.
__________________
Jon
http://jonsprintshop.com
Ti Pwun is offline  
Closed Thread

Thread Tools



All times are GMT +1. The time now is 11:50 pm.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Copyright ©2002 - 2019, Paul Stenning.