|
Vintage Audio (record players, hi-fi etc) Amplifiers, speakers, gramophones and other audio equipment. |
|
Thread Tools |
14th Jan 2019, 12:06 pm | #1 |
Triode
Join Date: Nov 2012
Location: Gateshead, Tyne and Wear, UK.
Posts: 37
|
Capacitor coding help please
Morning all and happy new year. My daughter's record player, which only identifies itself as an ALBA solid state, has started to distort a bit during play. A look inside shows a suspect looking disc capacitor, but I'm not familiar with the colour coding. It just appears to be brown with a single orange stripe across. Could someone look at the photos attached and identify it for me please?
|
14th Jan 2019, 12:13 pm | #2 |
Dekatron
Join Date: Apr 2011
Location: Cornwall, UK.
Posts: 13,454
|
Re: Capacitor coding help please
Thermistor, you might find the data on the electrojumble website:
http://www.electrojumble.org/techdata.htm Lawrence. |
14th Jan 2019, 12:34 pm | #3 |
Triode
Join Date: Nov 2012
Location: Gateshead, Tyne and Wear, UK.
Posts: 37
|
Re: Capacitor coding help please
Thanks Lawrence. It appears to be a Mullard VA1040.
Last edited by bruce tuckey; 14th Jan 2019 at 12:57 pm. |
14th Jan 2019, 12:45 pm | #4 |
Rest in Peace
Join Date: Sep 2008
Location: Solihull, West Midlands, UK.
Posts: 4,872
|
Re: Capacitor coding help please
It is a resistor whose resistance varies with temperature. It is probably used to set the bias for the output transistors. If it has become faulty then distortion is quite likely. Why do you suspect that component?
|
14th Jan 2019, 12:47 pm | #5 |
Dekatron
Join Date: Apr 2011
Location: Cornwall, UK.
Posts: 13,454
|
Re: Capacitor coding help please
|
14th Jan 2019, 12:57 pm | #6 |
Dekatron
Join Date: Apr 2012
Location: Worksop, Nottinghamshire, UK.
Posts: 5,554
|
Re: Capacitor coding help please
The thermistor does not look that bad.
I would first make sure that the stylus is OK first. What tools have you got? |
14th Jan 2019, 1:15 pm | #7 |
Triode
Join Date: Nov 2012
Location: Gateshead, Tyne and Wear, UK.
Posts: 37
|
Re: Capacitor coding help please
I've cleaned the pots and put a new stylus on. I thought the thermistor looked a bit crusty around the edges, so it might have deteriorated a bit.
|
14th Jan 2019, 1:45 pm | #8 |
Dekatron
Join Date: Nov 2009
Location: Lincolnshire, UK.
Posts: 5,000
|
Re: Capacitor coding help please
It sounds like a biasing problem in the output stage or thermal runaway due to leakage in one or both of those output transistors in the copper heatsinks. The adjustment pot on the circuit board should not be adjusted unless you know what you're doing. The pot itself could have a dodgy contact, but any cleaning or replacement would mean careful readjustment with a test meter and service information. There's other possible causes of the distortion that you mention, but saying exactly what it could be is really only guessing, and that's never a good idea if you're a novice.
|
14th Jan 2019, 2:28 pm | #9 |
Triode
Join Date: Nov 2012
Location: Gateshead, Tyne and Wear, UK.
Posts: 37
|
Re: Capacitor coding help please
I meant that I've cleaned the volume and tone pots. I've only worked on valve amps before - usually replacing the capacitors in the can seems to work for them.
|