View Single Post
Old 15th Jun 2016, 7:19 pm   #6
julie_m
Dekatron
 
Join Date: May 2008
Location: Derby, UK.
Posts: 7,735
Default Re: Uher 4400 Report Monitor noise problem

The right-hand meter is also used for the battery test function, so I would start by checking the battery test switch and its wiring. The switch has a changeover action; at rest, the positive terminal of the meter is connected to the monitoring preamp but when depressed, it is connected via a preset variable resistor in series with a fixed resistor to the positive supply.

There is a PDF circuit diagram here although it's all cut up and awkward to read on screen; might be OK printed out, though. It also includes pictures of the various boards, which should help you identify what is where.

If you have some sacrificial tape, does the noise on the left channel get recorded?
__________________
If I have seen further than others, it is because I was standing on a pile of failed experiments.
julie_m is offline