UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post - Microvitec Cub 1431 Power but no picture.

qsilver · 18th Apr 2018, 11:15 pm

I tracked down PL301 and there is no jumper or link on here. Should there be?

I checked the resistance on all the pins. Found the ground, tested the other pin and it started low and then charged to 38k at which point I removed my probe. The centre pin read 11k so does that look ok?

18th Apr 2018, 11:15 pm	#22
qsilver Retired Dormant Member Join Date: Jul 2010 Location: Carlisle, Cumbria, UK. Posts: 66	Re: Microvitec Cub 1431 Power but no picture. I tracked down PL301 and there is no jumper or link on here. Should there be? I checked the resistance on all the pins. Found the ground, tested the other pin and it started low and then charged to 38k at which point I removed my probe. The centre pin read 11k so does that look ok?