UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

af024 · 18th May 2019, 8:53 am

Thank you Tony,

I'll have a prod around and report back.

The servo package is really small - I'm quite amazed by that given the size of the motor.

I'll have to do some jumpering about with some croc leads or something, but I'll do that and report back. I'm not sure whether the tacho will need some exciting from the servo module however. I'll see what happens with it disconnected.

Regards,

Andy
PS Funny how it looks like the older machines will live longer eh! Well done you for having the AC type. Does that use gears for the two speeds then Tony?

18th May 2019, 8:53 am	#9
af024 Octode Join Date: Jan 2003 Location: Ashby-de-la-Zouch (it's not by the sea) Posts: 1,255	Re: Bell and Howell TQII 1652 16mm projector Thank you Tony, I'll have a prod around and report back. The servo package is really small - I'm quite amazed by that given the size of the motor. I'll have to do some jumpering about with some croc leads or something, but I'll do that and report back. I'm not sure whether the tacho will need some exciting from the servo module however. I'll see what happens with it disconnected. Regards, Andy PS Funny how it looks like the older machines will live longer eh! Well done you for having the AC type. Does that use gears for the two speeds then Tony? __________________ Now where on earth did I remove that from?