UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

JohnBHanson · 29th Mar 2019, 10:47 pm

The tape interface connected to a pc could be a useful way of reading mk14 tapes and
recovering lost programs. Most PC RS232 inputs will accept 0/5Volt inputs directly from the tape interface - just connect the output from the tape interface to pin 2 of the 9 way d, pin 5 as ground and supply ground and 5 volts to the tape interface.

Good luck.

29th Mar 2019, 10:47 pm	#14
JohnBHanson Heptode Join Date: Aug 2009 Location: Worthing, Sussex, UK. Posts: 662	Re: Mk14 programming The tape interface connected to a pc could be a useful way of reading mk14 tapes and recovering lost programs. Most PC RS232 inputs will accept 0/5Volt inputs directly from the tape interface - just connect the output from the tape interface to pin 2 of the 9 way d, pin 5 as ground and supply ground and 5 volts to the tape interface. Good luck.