Re: 4 Digit Up/Down Counter IC?
Hello Mark,
I was looking at the recorder's service manual and noticed that the counter is 3 digits, not 4 as I thought! What threw me was that a Revox B77 I have, does have a 4 digit counter, so I assumed the G36 was the same It's been so long since the recorder had one fitted that I'd forgotten it was only 3!
The 30mm x 7mm dimension applies the the 4 digit one, the 3 digit one measures about 22mm x 7mm. Also, the 3 digit one increments by one digit for about two revolutions of the spool. With a 2-segement encoder, that would give 4 pulses per digit, so that would need to be divided by four to give a reading equivalent to the mechanical counter.
If I can obtain a 4 digit seven segment display that will fit in the 22mm x 7mm 'window', then I'll still use 4 digits, otherwise it will be 3 digits.
Regards,
Dave.
|