Quote:
Originally Posted by jayceebee
If the wrong EHT tray has been fitted it would likely be a doubler which would produce less EHT resulting in excess width. Doubler was used with 16/17" models on the 1400, also 20" and below on the 1500.
1500 tripler in a 1400 and vice versa is not a problem other than the physical orientation, still produces 20kV. 950 tripler is fully compatible also.
Usually an easy problem to resolve and I've nothing extra to add to the other contributions, good luck anyway.
John.
|
Not quite true about the 950. The original is a half wave rectifier type.
Correct if referring to the 950mkII of course though, at least the 20kv 5-stick version.
1500 trays fit to the 1400s without any problems, but the reverse doesn't apply as the tray will be uppermount and too close to the PL504.