Re: Finally, figured out my Bang Olufsen LX 2800
Here are some pictures over the job done.
Main PSU board: All caps except the big yellow one is replaced.
Picture driver board: There are several pot's. These all correspond to
the various picture adjustment, vertical and horizontal.
Marked with a screwdriver is pot R111.
However, pots are not clearly listed in the manual with correct symbol.
In other manuals, like Japanese, there is a symbol stating what each pot does...
If you attempt to adjust these I suggest making a map with location of pot and a figure what the pot does.
Also, a good idea is to measure R with power off using a multi-meter before you start fiddling so you have something to go back to if you need.
Last edited by marsbar; 31st Mar 2017 at 10:52 am.
|