Re: Help Pls = Grundig TK64 Motor Not running
Well, I opened a TK40 with nice coloured motor wires. Measured the resistance across the 3 known leads
End to end = 51 ohms
Middle to ends = 234 / 286 ohms.
Now I measured the TK64 motors with unknown coloured motors
End to end 29.8 ohms
Middle to either end 82 ohms
I traced some of the wiring and only got more confused It not match my understanding or the TK40 wiring. In the TK40 the main power input is across the lowest resistance, but not in the TK64. Please see photos.
I have tried connecting a new 5uf between C and A, and between C to B, after isolating C from existing circuitry. Still no life.
The wiring I traced seems to indicate I understand the motors wires. But the resistance test and comparison to the TK40 has got me very confused
Am lost now. The resistance measured does not match the expected wiring. But I can’t trace all of it anyway.
Any experts ?
Last edited by Phantomrose1999; 7th Dec 2018 at 6:06 am.
|