Quote:
Originally Posted by cathoderay57
Hi Helder, from what I can see yours doesn't have any springs fitted. If you look at this thread https://www.vintage-radio.net/forum/...=160632&page=2 Post #33 has an image of the type of valveholder with springs, which looks different to yours. You shouldn't do any damage removing the valves, but my advice to you is if you don't need to remove them, then don't! Cheers, Jerry
|
Thanks Jerry. I merely want to clean the contacts and socket. The radio is working pretty well after recapping, and looks cleaner than shown in the photo (taken before I started restoring it). The alignment still needs some fine-tuning. The thing is that slight wiggling of the UCH42 produces some crackling noise at the output, which in a way should be normal, but I want to rule out dirty/oxidised contacts, and I didn't yet remove any valve from the set. I also have a spare UCH42 just in case.