Re: Modeline problem
You won't regret embarking on this project, I promise!
I got the Nvidia card working under XP without difficulty, but as you may know, after some investigation by Peter Scott, the ATI Radeon HD 2400 Pro became the card of choice, because the drivers compatible with Windows 7 ( and AFAIK later) were suitable.
I will look back through my notes and see if I can find which version ATI driver I was using. It is almost certain to be a graphics driver version issue.
Try this in the meantime, it's what I'm using.
Modeline "664x377_25 10.1kHz 50.0Hz" 8.100 664 680 752 800 377 378 385 405 interlace -hsync -vsync
__________________
--
Graham.
G3ZVT
Last edited by Graham G3ZVT; 1st Mar 2018 at 3:14 pm.
|