UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post - Trio 9R-59D receiver problems.

Station X · 16th Jan 2019, 12:48 pm

I've looked at the service manual.

In the parts list is doesn't actually give a working voltage for C34. It says it's a 0.01uF with a tolerance of plus or minus 20%.

The circuit diagram simply says C34 0.01.

The PCB layout says C34 .01.

The component itself is labelled

CP-C
.01uF (M)
630WV
RightCon
Japan

There is no conflict between any of the above values.

16th Jan 2019, 12:48 pm	#55
Station X Moderator Join Date: Jan 2003 Location: Ipswich, Suffolk, IP4, UK. Posts: 21,288	Re: Trio 9R-59D receiver problems. I've looked at the service manual. In the parts list is doesn't actually give a working voltage for C34. It says it's a 0.01uF with a tolerance of plus or minus 20%. The circuit diagram simply says C34 0.01. The PCB layout says C34 .01. The component itself is labelled CP-C .01uF (M) 630WV RightCon Japan There is no conflict between any of the above values. __________________ Graham. Forum Moderator Reach for your meter before you reach for your soldering iron.