UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

Richard_FM · 28th Jun 2019, 1:13 pm

Today I managed to find time to have a look inside:

I carefully bent the aerial socket to more or less it's proper position, it probably needs a bit of solder to do a proper fix, but I didn't have time to get my soldering iron out. This has improved things but still some fuzziness in the picture.

I adjusted the green level pot (PR-21) down by 1/8 of a turn, & the colours now look a lot better.

I took the usual tube label picture.

28th Jun 2019, 1:13 pm	#22
Richard_FM Nonode Join Date: Sep 2017 Location: Stockport, Cheshire, UK. Posts: 2,002	Re: Fidelity CTV140 Today I managed to find time to have a look inside: I carefully bent the aerial socket to more or less it's proper position, it probably needs a bit of solder to do a proper fix, but I didn't have time to get my soldering iron out. This has improved things but still some fuzziness in the picture. I adjusted the green level pot (PR-21) down by 1/8 of a turn, & the colours now look a lot better. I took the usual tube label picture. Attached Thumbnails __________________ Hello IT: Have you Tried Turning It Off & On Again?