View Single Post
Old 2nd Jan 2010, 11:34 pm   #36
Lloyd 1985
Nonode
 
Lloyd 1985's Avatar
 
Join Date: Jun 2008
Location: Coningsby, Lincolnshire, UK.
Posts: 2,819
Default Re: My new Superheterodyne!

Hi
your thread on building this radio has inspired me to have a go! I've used most of your design, but I've changed a couple of things. I didn't have an EBC90, so after a quick bit of research and a dig through the valve pile, I found an EBC81 should do the same job! I also bought a box of radio bits, and got some IF cans, the aerial and oscillator coils from a cossor (possibly a 520) and the wavechange switch! since I had all those bits, I've decided to copy the circuit of a cossor 520's mixer/oscillator and add it to your diagrams. no idea if its going to work yet!! I did have the amp, detector and IF amp working, I was getting the test tone on 465kc/s! This is the first time I've actually tried to build a valve radio, so there's a lot to learn so far I'm quite enjoying it. when I get a bit further on with it, I'll start a thread about it.

thanks for this thread!
regards,
Lloyd.
Lloyd 1985 is offline