View Single Post
Old 17th May 2018, 5:47 pm   #2
Panrock
Nonode
 
Panrock's Avatar
 
Join Date: Feb 2005
Location: Worcestershire, UK.
Posts: 2,525
Default Re: Repairing catalysed lacquer type finishes

I once restored a Grundig (or similar) cabinet - but this was a complete cabinet strip and I resprayed with two-pack urethane (ISTR) finish. The results were very good but I never want to have to do it again! The only way I was able to remove the original finish was to use a mechanical (ie. scraping) method. This was very hard work.

Steve
Panrock is offline