View Single Post
Old 11th Nov 2020, 3:23 pm   #20
sawleyram
Diode
 
Join Date: Nov 2020
Location: Sawley, Derbyshire, UK.
Posts: 9
Default Re: Bush SRP31D - Restoration

Quote:
Originally Posted by Techman View Post
...just so long as all four runs that go down through the arm pivot and bearing are the original thin flexible type - it doesn't matter about what actually runs along the arm itself, other than the fact that thicker wire will increase the tracking weight, which will need to be checked with a proper gauge and re-adjusted if necessary to prevent record damage.
Apologies for another post (there's no 'edit post' option on this forum) -- I've just re-read your reply to me.

I think what you are saying is that I need to be aware of the limited space at the point where the tonearm is joined at the pivot. I have had a look at this and realise there is very little room to thread wire up from underneath the deck. The point being separate to the extra weight added onto the arm itself.

Will report findings this weekend.
sawleyram is offline