UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

Courtney Louise · 14th Jun 2006, 6:17 pm

Am I right in thinking that I could put a line level audio signal onto one of the pins of the chassis connector to feed the grid of the audio amp?

Is there anyway I could feed a video signal in from My aurora after the IF and tuner stages just to make sure it will display a picture?

What if I fed a composite video signal into pin 6 of the inter chassis connector? and an audio feed into pin 3?

Andi

14th Jun 2006, 6:17 pm	#66
Courtney Louise Octode Join Date: Sep 2005 Location: Welshpool, Powys, Wales Posts: 1,327	Re: TV22 Restoration Am I right in thinking that I could put a line level audio signal onto one of the pins of the chassis connector to feed the grid of the audio amp? Is there anyway I could feed a video signal in from My aurora after the IF and tuner stages just to make sure it will display a picture? What if I fed a composite video signal into pin 6 of the inter chassis connector? and an audio feed into pin 3? Andi __________________ *33, 45, 78, around and around they go...*