UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

Ed_Dinning · 28th Nov 2008, 9:55 pm

Hi Stan, PM me if you need any prints of cards you do not have as I have about an 80% collection of cards and I'm in the area (I live near Stanley).

I'ts also worth fitting fuses in all the HT feeds from the transformer as it is a very complex beast that would be impossible to replicate. (I did one for the AVO 2 panel tester and that was very hard work).

Glad to se the project being revived again.

Ed

28th Nov 2008, 9:55 pm	#48
Ed_Dinning Dekatron Join Date: Jan 2004 Location: Newcastle upon Tyne, Tyne & Wear, UK. Posts: 8,194	Re: Mullard Valve Tester Card Project Hi Stan, PM me if you need any prints of cards you do not have as I have about an 80% collection of cards and I'm in the area (I live near Stanley). I'ts also worth fitting fuses in all the HT feeds from the transformer as it is a very complex beast that would be impossible to replicate. (I did one for the AVO 2 panel tester and that was very hard work). Glad to se the project being revived again. Ed