[sexton_mallard]

A much less wiser version of me decided to bulk recap years ago...arrgh. I worked through the frame fault section of the service manual and found C94 missing!

R102 had gone really high which on replacement restored a 50% high raster but clipping a 0.1 cap in the space where a cap was showing from my original pictures taken at the start of this thread resulting in a full raster! It's upside down but turning the yoke 180 degrees should fix that. For the first time on this set, the Aurora was fired up and I have sound but no vision so far. Checks will carry on to see what other mistakes I made. I learned a while ago to never bulk replace components and here's the proof...