View Single Post
Old 10th Oct 2018, 10:57 am   #19
See_Mos
Hexode
 
See_Mos's Avatar
 
Join Date: Nov 2003
Location: Ossett, West Yorkshire, UK.
Posts: 482
Default Re: Tandberg 3000x annoying problem

OK, it sounds as if it is going unstable and oscillating.

Turn the output level controls right down then scoping R112 and R212 then R106, R206 should show which stage is oscillating.

The common decoupling capacitor is C104 for the first stage and C300 on the power supply for the second but more likely is another bad connection at a cable screen or earth point.

Edit, just noticed that your circuit is completely different to the ones that I have. Can you scan the whole circuit and add it as a PDF?
See_Mos is offline