Re: Eddystone 730/4 Crystall Calibrator Connection to Front Panel
'Fraid I don't have a set to photograph but I've repaired plenty of them. There isn't normally a microswitch behind the button. The button is a round Painton switch I believe about two inches long with four leads going to it.
Looking in my military parts manual it says it's a single pole 2 way switch Nato number Z1/5930-99-940-3406. You might find that vmars manuals have a copy of the military illustrated parts list which is what I have in front of me, unfortunately with no photo of the switch.
It's possible that someone modified it if the switch failed by fitting a m/s which has lost its strip actuator. If you can send a well illuminated and clear photo of what is there I'll have a look to see if I have a suitable m/s complete with actuator.
Prior to 1993 I fitted a m/s to a 730/4. What chance is there that it could be the same set. I think I even repainted the case and front panel with silver metallic instead of wrinkle. I think I sold it at the NEC NVCF around 1993 so plenty of time to forget the details.
Hope this helps
Jim
|