Ultra portable 1400
I have just got this lovely set up and running.its been in dry storage all it’s life .prior to switch on I replaced the mains filter cap and a capacitor that was leaking and cracked. A couple others was running hot after 10 mins so these were replaced . Picture is pretty good but there is a slight compromise between both standards with me setting 625 lines for the best results.
There is curve on the side of the screen and that’s with the correction magnets bent fully in. I might try a stronger magnet to see if that helps.
Is there any more recommendations or mods that should be carried out for reliability or is it best left as it is. This set has the letter C on the board so is this a later version. Sorry the pictures are not that good Andy
|