UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

Station X · 6th Jan 2017, 9:16 pm

It's intact, but at some time it's come into contact with the adjacent cable sheath. Make sure that none of the wires within the sheath have been bared and could therefore touch each other.

6th Jan 2017, 9:16 pm	#80
Station X Moderator Join Date: Jan 2003 Location: Ipswich, Suffolk, IP4, UK. Posts: 21,289	Re: Tandberg Huldra 8 valve failure It's intact, but at some time it's come into contact with the adjacent cable sheath. Make sure that none of the wires within the sheath have been bared and could therefore touch each other. __________________ Graham. Forum Moderator Reach for your meter before you reach for your soldering iron.