UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post - Star Gemini-10 printer

mike_newcomb · 14th Mar 2018, 11:22 pm

Hi Chris,

from no print, following cleaning the Print Head you appear to have only partly solved the problem.
I would try further cleaning, such as soaking in IPA.

Am sure I had that Printer only differently badged. Think it came with three print modes, draft, nlq and letter quality. The test print could be demonstrating these, and others such as Bold, Enhanced etc. which would explain why some print is doubled up.

Is the Interface, serial, parallel or both?

Regards - Mike

14th Mar 2018, 11:22 pm	#7
mike_newcomb Rest in Peace Join Date: Apr 2012 Location: West London, UK. Posts: 665	Re: Star Gemini-10 printer Hi Chris, from no print, following cleaning the Print Head you appear to have only partly solved the problem. I would try further cleaning, such as soaking in IPA. Am sure I had that Printer only differently badged. Think it came with three print modes, draft, nlq and letter quality. The test print could be demonstrating these, and others such as Bold, Enhanced etc. which would explain why some print is doubled up. Is the Interface, serial, parallel or both? Regards - Mike