UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

Robint 47 · 30th Oct 2017, 9:38 pm

Paul. From the Decca service manual for the 110 series CTV, setting HT is as follows. With the receiver operating at zero beam current set the ht control VR618 to give a meter reading of 148V at the junctionof R404 and C402.

Sorry I can not answer any of the other points it's been so long since I worked on colour TV, I swapped over to audio just after the 60 series.

Regards, Robin.

30th Oct 2017, 9:38 pm	#19
Robint 47 Tetrode Join Date: May 2014 Location: Bridgnorth, Shropshire, UK. Posts: 52	Re: Mystery Decca (CZ8150) Paul. From the Decca service manual for the 110 series CTV, setting HT is as follows. With the receiver operating at zero beam current set the ht control VR618 to give a meter reading of 148V at the junctionof R404 and C402. Sorry I can not answer any of the other points it's been so long since I worked on colour TV, I swapped over to audio just after the 60 series. Regards, Robin. Last edited by Station X; 31st Oct 2017 at 12:21 pm. Reason: C