I tried every setting on the meter and the readings stayed stubbornly at 1
Colin.
Quote:
Originally Posted by SiriusHardware
Quote:
Did you mean black on 0V (eg Pin 8 pad on UG4) for the second set of readings? If so, then I can't get any reading at all for those pins
|
By 'No reading' you mean infinite or above 20K, I guess.
Obviously there are noticeable differences between three of the pin pairs and the others, but not enough to be conclusive by themselves.
Let's see what you find on the scope when looking at those lines.
Edit: Just caught your last, looking now.
|