UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post - Making a new meter for the AVO VCM Mk III, Mk IV, CT160 and CT160A.

RAadioloog · 18th Feb 2015, 3:27 pm

Hello,

I'm from the Netherlands and have a

about the AVO MK3 Aweeco panelmeter.
There is a lot of dust in mine and I wonder if there should be a gasket mounted between both meter halves.
It looks like both parts don't fit too well together.

The gasket between the meter and the frontpanel is still there.

Many thanks,

RAadioloog

18th Feb 2015, 3:27 pm	#18
RAadioloog Retired Dormant Member Join Date: Feb 2015 Location: Apeldoorn, Gelderland, The Netherlands Posts: 1	Re: Making a new meter for the AVO VCM Mk III, Mk IV, CT160 and CT160A. Hello, I'm from the Netherlands and have a about the AVO MK3 Aweeco panelmeter. There is a lot of dust in mine and I wonder if there should be a gasket mounted between both meter halves. It looks like both parts don't fit too well together. The gasket between the meter and the frontpanel is still there. Many thanks, RAadioloog