UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post - Help needed with

3pinplug · 15th Feb 2023, 8:20 am

Hi Paula
Pins 3 and 13 of IC25 are 0v.

I have triple checked and the pin with the dry joint was IC21 pin 15, i have redone the joint but no change as far as i can see. I did this before the above checks. Will be quiet now for a few days until the replacement IC arrives and i fit it, I have so much crossed it sorts it, if i move i may fall over!
Regards
Mark

15th Feb 2023, 8:20 am	#101
3pinplug Pentode Join Date: Jun 2016 Location: Kent, UK. Posts: 190	Re: Help needed with - Racal Dana 9081 Hi Paula Pins 3 and 13 of IC25 are 0v. I have triple checked and the pin with the dry joint was IC21 pin 15, i have redone the joint but no change as far as i can see. I did this before the above checks. Will be quiet now for a few days until the replacement IC arrives and i fit it, I have so much crossed it sorts it, if i move i may fall over! Regards Mark