UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post - Trio 9R-59D receiver problems.

Station X · 15th Jan 2019, 10:57 am

They'll be connected between pin 2 and the chassis. It'll be easy enough to measure the resistance of the resistor. However before you change anything check that the valve pins are clean and firmly gripped by the sockets in the valve holder.

15th Jan 2019, 10:57 am	#39
Station X Moderator Join Date: Jan 2003 Location: Ipswich, Suffolk, IP4, UK. Posts: 21,288	Re: Trio 9R-59D receiver problems. They'll be connected between pin 2 and the chassis. It'll be easy enough to measure the resistance of the resistor. However before you change anything check that the valve pins are clean and firmly gripped by the sockets in the valve holder. __________________ Graham. Forum Moderator Reach for your meter before you reach for your soldering iron.