UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post - JRC NRD515 HF Coms Receiver, 1982, FM on VFO?

Radio1950 · 8th Aug 2018, 8:05 am

Thanks very much again Jeremy,

no time for more at present. Back soon.

Damien,
In the interim.
Can you please have a look at the attached photo of my RX (in its original state, just a bit pulled apart), and check if your NRD515 has that same thin black earth wire and lug on the transformer mount screw?
You can see it from the top with maybe a torch, and with only the top cover removed.

Goes to "TP9" ("ETH") on the DC Reg PCB?
Thanks.

I found this photo from an earlier operation, changing the path of mains cable to the ON/OFF switch on the front panel.

8th Aug 2018, 8:05 am	#58
Radio1950 Hexode Join Date: Apr 2017 Location: Buderim, Queensland, Australia. Posts: 428	Re: JRC NRD515 HF Coms Receiver, 1982, FM on VFO? Thanks very much again Jeremy, no time for more at present. Back soon. Damien, In the interim. Can you please have a look at the attached photo of my RX (in its original state, just a bit pulled apart), and check if your NRD515 has that same thin black earth wire and lug on the transformer mount screw? You can see it from the top with maybe a torch, and with only the top cover removed. Goes to "TP9" ("ETH") on the DC Reg PCB? Thanks. I found this photo from an earlier operation, changing the path of mains cable to the ON/OFF switch on the front panel. Attached Thumbnails