Re: Pye VT4.
Update,went through all the resistors in line/tb which were all high in value,replaced with 0.6 watt metal film types,also checked 100pf fixed mica and 100pf preset line hold trimmer ,the 3 12uf cap's have been replaced plus all the cap's in tb which were orrible unt's have been changed.The tb now seem's to be working but not very strongly there is a waveform at the line output valve grid but still no eht with a small spark from the ey51 anode.both the pl81 py81 and the ecl80 test 100 %
|