UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

FERNSEH · 8th Jul 2017, 6:29 pm

Hi Andy,
The metal bar is exactly 16 inches high and 1 inch wide. Thickness is 2.4mm. It does extend out by about 6mm at the bottom of the back cover.

DFWB.

8th Jul 2017, 6:29 pm	#162
FERNSEH Dekatron Join Date: Mar 2005 Location: Gateshead, Tyne and Wear, UK. Posts: 7,444	Re: HMV 905 Project Hi Andy, The metal bar is exactly 16 inches high and 1 inch wide. Thickness is 2.4mm. It does extend out by about 6mm at the bottom of the back cover. DFWB. Attached Thumbnails Last edited by FERNSEH; 8th Jul 2017 at 6:34 pm.