View Single Post
Old 8th Aug 2006, 8:35 pm   #7
MALC SCOTT
Octode
 
MALC SCOTT's Avatar
 
Join Date: Aug 2006
Location: Willington, County Durham, UK.
Posts: 1,499
Default Re: Thorn TX90 - line timebase problem

Hello, the fault that you have described is almost certain to be c189, c191 both 22mfd.
Also make sure that the HT volts can be varied with the HT pot RV224.
If it has little effect, replace tr107 bd839. C125 68n, c130 2.2mfd, c197 100nf.
C124 2n7 also gives problems with this fault.
I have serviced hundreds of these sets over the years and many still continue to give good service.
MALC SCOTT is offline