UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

Techman · 14th Jan 2021, 12:14 am

As above - I think the one with the clear plastic outer is the one, as I can't see what else it could be - check its value and voltage.

I did replace it in that amplifier, but obviously not when that picture was taken - remember, electrolytic capacitors MUST be connected the correct way round and the same as the original one is...they explode if you get them wrong!

I'm going to have a look to see if any picture still exists of this particular component being replaced - I couldn't find one of it earlier.

14th Jan 2021, 12:14 am	#8
Techman Dekatron Join Date: Nov 2009 Location: Lincolnshire, UK. Posts: 5,000	Re: Dynatron Ether Conqueror restoration As above - I think the one with the clear plastic outer is the one, as I can't see what else it could be - check its value and voltage. I did replace it in that amplifier, but obviously not when that picture was taken - remember, electrolytic capacitors MUST be connected the correct way round and the same as the original one is...they explode if you get them wrong! I'm going to have a look to see if any picture still exists of this particular component being replaced - I couldn't find one of it earlier.