UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

thejazzageuk · 12th Jul 2016, 12:08 pm

Thanks Techman. That all looks good.

I've attached a photo to indicate where I believe I should monitor HT. C49 is the (identical) large capacitor behind the visible one. I checked the indicated point 'A' with a multi-meter and it is connected to pins 2 and 8 (filament) of the rectifier valve V11. So I should connect between chassis and point 'A' to monitor the HT, does that seem right?

12th Jul 2016, 12:08 pm	#117
thejazzageuk Pentode Join Date: Feb 2014 Location: Carmarthen, Wales, UK. Posts: 238	Re: Restore a Beau Decca Thanks Techman. That all looks good. I've attached a photo to indicate where I believe I should monitor HT. C49 is the (identical) large capacitor behind the visible one. I checked the indicated point 'A' with a multi-meter and it is connected to pins 2 and 8 (filament) of the rectifier valve V11. So I should connect between chassis and point 'A' to monitor the HT, does that seem right? Attached Thumbnails