UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

Terry_VK5TM · 3rd Apr 2022, 10:26 am

If Richard got the code from Elektor, all that is supplied is the HEX file (no source code).

There is a note in the zip archive re config words so possible these are not set in the HEX file which is stopping the PIC intialising properly.

Alternative is that the LCD is not wired properly.

3rd Apr 2022, 10:26 am	#10
Terry_VK5TM Nonode Join Date: Oct 2010 Location: Tintinara, South Australia, Australia Posts: 2,340	Re: 16x2 LCD problem? If Richard got the code from Elektor, all that is supplied is the HEX file (no source code). There is a note in the zip archive re config words so possible these are not set in the HEX file which is stopping the PIC intialising properly. Alternative is that the LCD is not wired properly. __________________ Terry VK5TM https://www.vk5tm.com/