Re: The "Sussex" Homebrew Valve Tester.
Andy,
Yes I did fit a 3mm LED to each switch as an indicator to show which position of the knob was selected. Originally I wanted something "more professional" than a simple felt tip mark as I was not sufficiently adept with a small paintbrush to paint a spot.
I did originally glue the LEDs in place, but decided to light them up as a bit of "flash". They are connected in series across the LT supply, with , if I remember rightly a 2k2 reistor in series.
They serve no other purpose other than to show the switch position and could be omitted and another method used.
Regards
Mike
|