View Single Post
Old 23rd Jul 2017, 6:48 am   #3
TonyDuell
Dekatron
 
Join Date: Jun 2015
Location: Biggin Hill, London, UK.
Posts: 5,188
Default Re: Teletype question

I don't think any mechanical Teletype had controls to set any of the serial parameters. Word length would be set by the design of the distributor disk (in a Model 33) or transmitter cams (in some earlier models) and the no-parity and even-parity keyboards are quite different inside on a Model 33. On the Model 33 (where the keyboard actually produces parallel data) it would be possible to turn parity on and off electrically, but I have never seen it done.

Some Teletype machines had a manual or automatic dialer on the right side of the cover with buttons to connect to the line, etc. Those are very uncommon in the UK for obvious reasons.

Data Dynamics made a series of machines that used Teletype (Model 33) mechanisms with their own electronics. Some of them had a row of illuminated buttons on the right as you describe, the one I have had 4 such buttons to :

Start/Stop the motor

Select half duplex (local echo)

Select full duplex

Single step the tape reader.
TonyDuell is online now