Hamish
Had thought of that, I think he is a bit busy at present but will contact him
Cheers
Andy
Quote:
Originally Posted by pnh0001
Hi Andy
I had the same problem with mine, one half of the secondary was o/c Initially I replaced with a 3:1 interstage transformer from Antique Electronic Supply. That worked fine.
I also rewound the entire transformer primary & secondary as I destroyed the primary some how in getting the secondary windings off. Rewinding was a real pain, I made up a winder in meccano that automatically went backwards and forwards to lay out the windings. Took hours, but again the end result worked fine and is indistinguishable now from original.
You can see my winder here:
https://www.youtube.com/watch?v=KWIVDToPSIE
At that point it was doing one half of the secondary winding, (the primary had been done) the bits of white are dowels holding the space of the second half of the secondary.
regards
Peter
|
Peter
Love the winder, brilliant, wish I had kept all my Meccano as a kid!
OK on replacement transformer, will look into that.
Peter, was the transformer from Antique their P-T156 3:1 interstage?
Cheers
Andy