Quote:
Originally Posted by Jolly 7
@Lawrence
Fortunately I have a stash of the 1 watt ones. The specimen (like the radio) in the photo came in a box marked AE396 mod kit from Gerry Wells's museum.
It measures 231 ohm on my multimeter. Good to go ?
|
That is not a 1 watt type (the one nearest the 5p piece). That is the old size 1/2 watt. It will probably do for test but it's likely to run a bit hot...... If you don't have a 1 watt 220 ohm you could fit two 470 ohm half watts in parallel which will give 235 ohms (near enough to 220 ohms 10%) at 1 watt.