View Single Post
Old 21st Dec 2008, 11:44 am   #13
humphrey
Retired Dormant Member
 
Join Date: Aug 2008
Location: Bellac, 87. France.
Posts: 357
Default Re: Mullard valve tester E7600/3

I think that it is due to a simple omission on my part. The 6m8 resistor goes to the rear wafer switch (next to the pillar) I think i left out a resistor here as it has been snipped off and I cant see where it went or what it was. The schematic is not clear at this point. Any ideas?
humphrey is offline