View Single Post
Old 19th Jan 2019, 10:27 pm   #3
Freya
Octode
 
Freya's Avatar
 
Join Date: Jan 2009
Location: Falmouth, Cornwall, UK.
Posts: 1,987
Default Re: Hedghog and soldering

Hi Eddie,

I have built quite a few of these and found its easiest to use an alcohol based flux pen, then tack one leg and re check the alignment. If all is well then tack an opposite.
When its in place just work along gradually making sure you top up the flux if need be. If you get a bridge then use solder braid with lots of the alcohol flux and it will remove any excess.
__________________
Stephen
_________"It`s only an old telly" ___
Freya is online now