UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

frglee21 · 3rd Mar 2012, 8:37 pm

This may seem an odd one but the "licence plate" was missing from the inside of the cabinet of my Bush DAC10 so I made this one for completeness.

It's beyond me - and my drawing software - to recreate the logo so I took a scan of the one in my DAC90A. The scanned licence plate has suffered a bit from heat so the bottom of the outer rings is slightly deformed. It does look better when it's printed out.

I covered it with clear adhesive film then mounted it onto a piece of plastic to make it look reasonably authentic.

The actual size is 6.2cms x 1.8cms

If anyone is interested I can add the serial number of their radio to the plate.

Regards, Lee.

3rd Mar 2012, 8:37 pm	#25
frglee21 Retired Dormant Member Join Date: Aug 2009 Location: Manchester, UK Posts: 160	Re: Useful tuning scale and label scans etc This may seem an odd one but the "licence plate" was missing from the inside of the cabinet of my Bush DAC10 so I made this one for completeness. It's beyond me - and my drawing software - to recreate the logo so I took a scan of the one in my DAC90A. The scanned licence plate has suffered a bit from heat so the bottom of the outer rings is slightly deformed. It does look better when it's printed out. I covered it with clear adhesive film then mounted it onto a piece of plastic to make it look reasonably authentic. The actual size is 6.2cms x 1.8cms If anyone is interested I can add the serial number of their radio to the plate. Regards, Lee. Attached Thumbnails Last edited by frglee21; 3rd Mar 2012 at 8:44 pm.