Thread: Gec bt1091.
View Single Post
Old 16th Feb 2018, 12:06 am   #15
1100 man
Octode
 
1100 man's Avatar
 
Join Date: Apr 2016
Location: Ventnor, Isle of Wight, & Great Dunmow, Essex, UK.
Posts: 1,377
Default Re: Gec bt1091.

Quote:
I'll try to replace as many of those four value band resistors as possible. There's no doubt those new resistors are excellent but like the hi-viz capacitors the modern resistors just don't look right in this set.
Hi David,
Four band colour code resistors are just plain wrong, especially small ones on a blue body A 10K should look like a 10K, not a 100 Ohm with extra bits!!

I found the CFR100 range from RS look similar (at least in spirit) to the old Erie ones. The body size is almost the same and they have a proper colour code. Unfortunately the range is limited so for the other values I use the RS Pro 2W range. These are the same size but have a pinkish body but look acceptable once installed.
RS will also send free delivery next day even for 10 resistors!!
Pictures here in post 13 https://www.vintage-radio.net/forum/...d.php?t=134572

I'm sure you probably know that already though!!
All the best
Nick
1100 man is offline