UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post - Sanyo VTC 5350 dead after replacing PSU caps

dj_fivos_sak · 22nd Jul 2019, 5:39 am

So, I just hard-wired the 12V rail to an external power supply, and the unit turned on (except for the display of course). I even tried a tape and it played fine on my B/W set. However, I won't plug both power supplies in as I want to avoid further damage to the machine. But at least this tells me that the 12V rail isn't shorted elsewhere in the machine...

Fivos

22nd Jul 2019, 5:39 am	#6
dj_fivos_sak Heptode Join Date: Mar 2015 Location: Lefkada, Greece Posts: 969	Re: Sanyo VTC 5350 dead after replacing PSU caps So, I just hard-wired the 12V rail to an external power supply, and the unit turned on (except for the display of course). I even tried a tape and it played fine on my B/W set. However, I won't plug both power supplies in as I want to avoid further damage to the machine. But at least this tells me that the 12V rail isn't shorted elsewhere in the machine... Fivos Attached Thumbnails