View Single Post
Old 17th Jul 2019, 10:40 am   #2
Welsh Anorak
Dekatron
 
Welsh Anorak's Avatar
 
Join Date: Apr 2005
Location: North Wales, UK.
Posts: 6,928
Default Re: Sanyo VTC 5350 dead after replacing PSU caps

I suppose it's stating the obvious, but check, check and check again everything you've done. I suspect there's a broken track somewhere, and your lack of voltage is the first place to start. Don't forget a short across this capacitor will cause the tripping as well as an open circuit, so a solder splash is certainly possible - or even a faulty capacitor - it has been known!
__________________
Glyn
www.gdelectronics.wales
Welsh Anorak is offline