View Single Post
Old 23rd Sep 2019, 2:38 pm   #2
ms660
Dekatron
 
ms660's Avatar
 
Join Date: Apr 2011
Location: Cornwall, UK.
Posts: 10,289
Default Re: Vintage Radio and Phonograph cutter schematic

The only line capacitor I can see is the 0.01uF that's connected from the mains AC line to ground/chassis, if you replace that one you should replace it with a Y Class type.

The Candohm resistor is 4.5 ohms wire wound, so far as I can make out it's a dummy load for the output stage when the loudspeaker is disconnected, probably mounted on the chassis, you can replace it with a similar value wire wound resistor rated at 10 watts.

Lawrence.

Last edited by ms660; 23rd Sep 2019 at 3:05 pm.
ms660 is online now